Free Software

Program Platform Description
Micronics W6-LI Manual N/A This is 48.3MB PDF file of the W6-LI manual.  I tried to get it smaller (original scan produced a 152MB PDF, so I did get it down a bit).  I fear that any less quality in the scan would result in unreadable data (specifically on the motherboard layout and other figures in the manual).

Removed file due to malicious user.

Delayed Startup Win32 A program to auto-run definable tasks once a specified system uptime has been reached.  This would be extremely useful if you have multiple programs that must be loaded in a specific order.
Serial
LCD Date/Time Display
Win32 This archive contains everything needed (except the parts, of course) to build a serial to LCD.  Also included is a sample Windows application.  The Atmel source file shows the "protocol" for communicating with the display.
The original Atmel code was written by Stelios Koroneos
LCD Date/Time Display Win9x Simple utility to display system date and time on a 2x24 LCD/VFD display connected via LPT1
Actual LCD/VFD dimensions are definable, but only the top 2 lines will be used, and I recommend no less than 24 character width displays.
Using parallel interface by Randy Rasa
Caller*ID Deluxe Win32 Caller*ID and Caller*ID Deluxe monitoring software
ZIP includes full Visual Studio 6 project/source.
NOTE: This software is designed to work with a serial device that passes the raw Caller*ID data stream and not a cooked version as a modem will do.
MageLink v1.30.002beta DOS IPX file transfer utility (docs included in zip)
BSIU DOS Basic system info utility
AudioSel DOS Audio File Selection Menu (docs included in zip)
MOB-Trim DOS Maximus/OPUS/Binkley-style log trimming utility (docs included in zip)
PARTBLD DOS I've used this to rebuild the master partition table on a hard drive
PARTFIND DOS Searches hard drive for partition tables
SETBOOT DOS Sets the first primary DOS partition on a drive to active status (not compatible with FAT32 partition types, defaults to 2nd drive)
SBUTIL DOS A couple SB utilities I wrote.  See included docs for details.